A New Way to Maximize Your WakeThe hottest product to hit wakesurfing since the creation of the wakesurfer, this device easily mounts to the lower/back point of the starboard or port side of your boat hull for a premier surf wake on either side. Ronix has tested every aspect of wakesurfing using waterski boats, crossover boats, older V-Drives, and newer V-Drives…and one thing is constant; this is a game-changer.In addition to turning wakes into swells, you’ll no longer have to weight your boat unevenly, which is the best part. Gone are the days of filling and draining your bags to the port or starboard side. Keep it all in the center.There has never been this type of aftermarket innovation that makes this kind of difference that can so easily be mounted to the side of the hull. With a built-in handle, the Wakesurf Shaper is easy to move to either side of your boat, and is best paired with a loaded Eight.3 ballast system.Shim OptionsThe shim is a simple attachment between the Wakesurf Shaper and a boat’s hull. Every hull shape is different. Some are mostly flat and don’t require a shim. Others have a step hull and require a 1″ shim. And…other boats have a more pronounced step and need a 2″ shim. In some cases you might need both shims for a 3″ gap between the hull and your Wakesurf Shaper. For installation…it is recommend the Wakesurf Shaper be 80% subgmerged when your boat is properly weighted, and as close to the stern as your hull will allow.Wakesurf Shaper PlacementThe adhesive fastener strips that attach to the boat are intentionally 6″ longer than the Wakesurf Shaper. This allows for further adjustment towards the bow or the stern of the boat, greatly altering the shape of the wake. When closer to the stern, the wake becomes steeper and deeper. Closer towards the bow and the wake gets a longer sweet spot. Who says you can’t surf tandem?*Comes complete with: Wakesurf Shaper, 2 adjustable shims, 4 adhesive fastener strips, instructional USB, and an owner’s manual.